In some cases it may be necessary when you go into the BIOS after a reset, to load the Optimal default or Default values and then save settings, to actually get the hardware tables to reset in the boot manager.With a list price of US$249.99, the ASRock Z690 Pro RS motherboard is a reasonably-priced LGA 1700 motherboard for both 12th Gen and 13th Gen Intel Core processors, as long as the user is willing to settle for DDR4 memory. If the system will POST and boot then you can move forward from there including going back into the bios and configuring any other custom settings you may need to configure such as Memory XMP profile settings, custom fan profile settings or other specific settings you may have previously had configured that were wiped out by resetting the CMOS. Enter the bios setup program and reconfigure the boot settings for either the Windows boot manager or for legacy systems, the drive your OS is installed on if necessary. It should display the POST screen and the options to enter CMOS/BIOS setup. Now, plug the power supply cable back in, switch the PSU back on and power up the system. If you had to remove the graphics card you can now reinstall it, but remember to reconnect your power cables if there were any attached to it as well as your display cable. After the five minutes is up, reinstall the CMOS battery making sure to insert it with the correct side up just as it came out. In some cases it may be necessary to remove the graphics card to access the CMOS battery.ĭuring that five minutes, press the power button on the case for 30 seconds. Remove the motherboard CMOS battery for five minutes. Power off the unit, switch the PSU off and unplug the PSU cord from either the wall or the power supply.
Also, you should make sure you have the latest AMD chipset drivers installed using the AMD All in one driver setup package.Īfter updating, I would do a hard reset of the BIOS and then reconfigure your settings. The latest release was today, version 2.6. Personally, I'd recommend that you check to see that you have the MOST recent BIOS version installed, as there may have been more a more recent release than what you have installed. Are you going to the exit tab in the BIOS and saving the settings?Īre the keyways on the three pin connectors lined up with the key on the fan headers?
0 kommentar(er)
